Fall and winter ride how to wear more good-looking? Fall and winter ride with skills
Cold winter, we need a stylish warm coat to help us keep warm and dress up, but as a sophisticated fashion woman, when we take off the coat, the inside should take fashion sophisticated Caixing, so how to fall and winter Wear it look good? The following small series for everyone to support a few strokes.
Autumn and winter season coat, most MM will choose the long section of the design, this time we can choose the knit shirt + shirt as the ride to wear inside, the body of the MM on the map with this is a good demonstration of fashion generous Warm and warm, the long design also just right cover the excess fat waist and abdomen, as long as with the jacket and boots, is a stylish and warm winter with a.
Of course, if your jacket thick enough, then directly with the primer shirt on it, such as the MM body so white primer T-shirt is good, gives a very simple and generous feeling, and then with a short skirt and Boots to wear together, exposing part of the thigh to add a little bit sexy but not too cold, is also a very good choice within the take. (Figure source: background color women )
It is used to bolt thin sheet metal parts to larger, often billet or forged, parts. The barrel nut is a round slug, or formed sheet metal part with threads perpendicular to the length of the nut. The nut sits in a hole inside the forging and a standard bolt is threaded into the barrel nut from outside the sheet metal. They are preferred over a standard nut and bolt, because they do not require a flange to be machined or forged onto the receiving part, thus reducing weight.
Furniture cross dowel barrel Nuts are cylindrical shaped metal nuts (metal dowels) used with furniture connector Bolts to join two pieces of wood. The inside threaded hole is unusual in that it passes through the sides of the dowel. To install, the pieces of wood to be joined are aligned, then a bolt hole is drilled through one piece of wood and into the other. A dowel hole is drilled laterally across the bolt hole and the cross dowel is inserted into it. The end of the cross dowel is slotted so that a screwdriver can be inserted to rotate the dowel so that its threaded shaft aligns with the bolt hole. The furniture connector bolt is then inserted into the bolt hole and screwed into the cross dowel until the wood pieces are held tightly together.
dowel nut, barrel nut, cross dowel nut
FinExpress Precision Manufacturing(Dongguan) Co., Ltd , https://www.finexpresshardware.com