What are the procedures for jade processing?
What are the procedures for jade processing? China has more than 6,000 years of jade culture history. It can be said that jade is an important part of our traditional Chinese culture. It deeply affects the Chinese people's thinking. Jade itself is also a noble representative. For example, Ning is not a complete jade, but it is a word for jade, ice, jade and so on. However, to create a beautiful jade is to go through a lot of processes, sawing → honing → polishing → waxing, these procedures are also an important factor affecting the price of jade, let's take a look at it with Xiaobian!
Saw cutting: This is the first process of jade processing. First, we will put the jade raw materials into the sawing machine and cut them into appropriate shapes and sizes. The man-driven mud-sand saws used in ancient times were very time-consuming and labor-intensive. With the development of technology, various electric-driven cutting machines have replaced force-driven mud-sand saws. Especially nowadays, the hot-cast saw blade and the rolled-plated saw blade are widely used to directly cast or roll the diamond powder on the blade edge of the saw blade, so that the saw machine can quickly fix any hardness of jade with only cooling water. The cutting is performed so that the cutting efficiency is very high, and the most important such saw blade is inexpensive and has a low rate of loss of raw materials.
Honing: The second process of jade processing, the key to observing the quality of a jade is the honing process, which must be completed by the combination of abrasives and abrasives. Now we basically use resin, The bonding agent such as metal or ceramic fixes the abrasive on a certain substrate to form a grinding tool, and then honing the jade.
Polishing: The third process of jade processing, this is actually a finishing process. After this process, the jade can be made more beautiful. The principle is to mix the polishing agent with certain liquids such as water and sewing oil in a certain proportion. , so that it adheres to the polishing tool and rubs against the workpiece. There are two kinds of polishing tools: one is a polished jade, which is usually made of hard materials such as metal, plastic, wood, etc.; the other is polished spherical or convex. Jade articles are generally made of felt, leather, woolen, etc. to make polishing discs or polishing wheels. Of course, the common jade is curved, so soft polishing tools are usually used.
Waxing: The last step in the processing of jade, this is to process the finished jade, so that the jade becomes more radiant and shiny. There are two kinds of waxing methods: steaming wax, which is to put the jade into the steamer and heat it, then sprinkle the stone powder on the jade. After the wax is melted, the jade will be covered. Of course, this method has limitations. The other is to cook the wax. First, the wax is boiled and kept at a certain temperature. Then the jade is placed in a sieve-like jade, and then immersed in the boiled paraffin, and then quickly picked up. The excess wax is clean, and then wipe off the surface of the wax with a towel, which is also the best, the waxing method we use most.
What are the procedures for jade processing? After the above several processes, a beautiful jade is presented in front of everyone. Compared with the original stone, the finished jade processed through various processes will be more favored by everyone. The price is also tens or even hundreds of times higher than the original stone, which fully reflects the importance of the jade processing process.
Compression Socks,Novelty Youth Socks,Striped Funny Socks,Sport Running Knitted Socks
Shaoxing Evergreen Knitting Co., Ltd. , https://www.egsock.com