[China Glass Network] LED Glass (LEDGlass), also known as power-on luminescent glass, electronically controlled illuminating glass, was invented earlier by Germany and successfully developed in China in 2006. It is transparent, riot-proof, waterproof, UV-resistant, and designable. Mainly used in indoor and outdoor decoration, furniture design, lighting design, outdoor curtain wall glass, sun room design and other fields. How to choose the right LED glass is also a matter of learning.
Glass: Glass panel is optional, customers can choose from a variety of products such as ordinary float glass, ultra-white glass, fire-resistant glass, insulating glass, tempered glass, semi-tempered glass, coated glass. The glass structure is a sandwich structure and should comply with European EN standards, American ASTM standards, and all domestic safety glass application standards.
Particles: The use of genuine LED particles because of the design to a practical age, luminous effects and energy consumption. Double-sided LEDs to ensure double-sided transparency of the glass.
Wire: Transparent wire, because the transparent wire is definitely high temperature and high pressure processing and coating technology. This is not a simple aesthetic and application issue, but also designed to use security issues. Manually produced wires are susceptible to brittle cracking during long-term use. [The glass itself is elastic. If it is exposed to external force such as wind, it will have different effects on the wire.]
Interlayer: The use of global quality imported PVB interlayer film, the intermediate film should meet the European safety glass standard (EN standard) to ensure the safety and service life of laminated glass. The PVB interlayer should be sandwiched in an autoclave rather than a conventional furnace to ensure better quality of the laminated glass. Never use an EVA or grouted sandwich that does not meet the safety glass standard. The processing plant shall hold the test report and certificate of the European standard for laminated glass.
Coating: On-line coating technology, it is well known that the cost of in-line coating is much higher than that of off-line coating. From the later years of use, we can see the difference. The off-line coating will gradually oxidize in a year or so, so that the LED lamps of the glass interlayer are no longer illuminated. The in-line coating is processed using an oxidation process so that the oxidized film continues to conduct electricity. Therefore, the practical period is several times that of offline coating.
Application: A large-scale application can ensure a safe voltage of 24 volts, in order to be truly a new material for environmental protection and energy conservation.
Scratches: International standards can be achieved, and there are no scratches at the end of many processes.
Light change: You can use the chip to control changes, such as flashing, gradual changes and the like.
Voltage: The voltage used by LED glass is a safe voltage. According to relevant national regulations, the voltage range should not exceed 24 volts, otherwise it may not be used in architectural decoration.
The surface of the alloy blade is flat and smooth . The blade width is 2.5cm, Shading can also give indoor fresh air blade free turnover day lighting. Aluminum magnesium alloy leaves treated by baking process are waterproof and oil proof, suitable for kitchen, bathroom, and office. Encrypt aluminum piece, close closely, do not leave aperture, shading is strong enjoy the illicit close space that belongs to him. High strength aluminum alloy material, good toughness, blade is not easy to break deformation. Keep out ultraviolet rays, shade the sun and heat insulation, save energy and cool down. Manual, electric and remote control system selection, simple and convenient operation.
Aluminum Window Blinds,White Aluminium Venetian Blinds,Aluminum Curtain Blinds,Curtain Blind Aluminum Alloy
SHAOXING XIANHENG INTERNATIONAL LTD. , https://www.sxcurtain.com