Watch maintenance 12 law, everything for fashion
The Laukadan watch is a Swiss watch that is known for its elegance. Each watch is a perfection of a long tradition, craftsmanship and elegant attitude. The Laukadan mechanical watches are popular all over the world, not only for fashion men's must-have watches. Women's watches are also very popular. But good watches should also be worn well. What are the precautions for the maintenance of Laokadan automatic mechanical watches? Let's share the precautions for wearing a Laokadan automatic mechanical watch.
1. When wearing a Laukadan watch, the sweat on the hand is corrosive to the case. If the all-steel case is made of nickel-chromium alloy, the corrosion resistance is better. The semi-steel case is copper, which is in contact with sweat for a long time. It is easy to corrode. Always use a soft cloth to wipe off the sweat or put on a plastic watch to prevent it from being eroded by sweat.
2, only the appropriate amount of activity, in order to make it last, in general, when the wearer's activity is small, the watch may be slow when walking, this is a normal phenomenon. It is recommended that the user rotate the crown 20-30 times when using it for the first time to ensure that the string moves normally. In addition, although the watch is shockproof, it is easy to break the pendulum shaft tip or the wheel axle journal when the impact force of the outside is strong, and the slow and slow needle vibration can also affect the travel time.
3, do not put the watch in the wardrobe with mothballs, so as not to deteriorate the oil. Do not open the back cover of the watch mechanically to prevent the dust from entering the movement and affect the normal operation of the watch.
4, do not put the watch on the amplifier, audio, TV, in order to avoid magnetization. Although the watch is made of a material that is not easily magnetized, it is greatly affected by the magnetic field during walking, so keep away from the magnetic field.
5, long-term storage of non-wearing watches, should be issued once a month, the automatic movement of the watch should be gently swing back and forth for a few minutes or wear on the wrist for a period of time to automatically tighten the spring. The parts are not kept in a static state for a long time to ensure the running performance of the watch.
6. The ordinary mechanical watch is wet. You can use dry cotton to press on the watch, and then bake it with a low-power light bulb for 5 minutes. The moisture in the watch can all be evaporated.
7. Receive a beloved watch. When removing the outer packaging, always save the box used for the protective watch. These protective watch cases can give the watch the safest protection when it is not worn properly, to prevent the watch from being broken or being bumped, so it is absolutely necessary to keep the box, and it is recommended that when not wearing the watch on weekdays. Forming habits into the box can greatly reduce the chance of damage to the watch.
8. It is best not to wear the same watch every day. You should prepare several different watches to use alternately. In addition to enriching your personal style, you can also avoid dust and body dirt from being concentrated on the same watch. For the leather strap, care should be taken to avoid frequent wear and tear on the strap, so even if the surface is new, the watch will look very old.
9. Put the watch on your wrist and sleep. If the watch is a luminous watch, it will have a negative impact on the body. This is because the pointer of the luminous table and the luminescent material coated on the dial are mainly a mixture of radium and zinc sulfide. The radiation emitted by radium can stimulate the crystal of zinc sulfide crystal. When sleeping, if the watch is worn, the human body will suffer eight The nine-hour radium radiation is harmful to the human body. Therefore, before going to bed, it is best to take the luminous table and put it on the table.
10, the table was refurbished. After the watch has been marked with a lot of lines, you can drop one or two drops of water on the surface of the watch, and then squeeze a little bit of toothpaste to remove the scratches and make the watch look like new.
11. The newly purchased automatic mechanical watch may not have enough activity during the week, which may result in insufficient time. Therefore, it is recommended to swing the watch to the left and right for about 1 minute in a horizontal state before the night is put down to supplement the winding to ensure the time. normal. The fully automatic mechanical watch must be automatically wound by the arm swing, so it must be worn for more than 8 hours every day to ensure accurate timing.
12, try not to bring a watch to swim or wash clothes, once the rain is wet or wet, you can not pull the watch to adjust the watch at this time, but to dry immediately. Since the head is relatively convex, try to avoid it being bumped. At the same time, it is also necessary to pay attention to the gap between the head and the case. If it is too small, it will affect the operation, and the effect of the assembly will affect the waterproof performance.
Flame Retardant Jacket,Flame Resistant Jacket,Fire Retardant Jacket,Fireproof Jacket
Xinxiang Worldbest Patron Saint Co., Ltd , https://www.xxhyhsworkwear.com